BTF-LIGHTING SK6812 RGBW 16.4ft 5m 60leds/Pixels/m Individually Addressable Flexible 4 in 1 LED

BTF-LIGHTING SK6812 RGBW 16,4 pieds 5 m 60 LED/pixels/m LED flexible 4 en 1 adressable individuellement

📢BTF-LIGHTING SK6812 RGBW 16,4 pieds 5 m 60 LED/pixels/m LED flexible 4 en 1 adressable individuellement Caractéristiques :

1. Adressable individuellement

2. Projet de ventilateur et de bande LED économique

3. Chaque LED est adressable individuellement

4.Conception chaînable

5. Fabrication d'écran LED, de mur LED, de panneau publicitaire, applicable à l'hôtel, au KTV, aux bars, aux panneaux publicitaires extérieurs, à la décoration de festival de Noël ou de fête de mariage.

🛒Lien d'achat :

Page d'accueil : https://bit.ly/37pb3NF

Lien Amazon : https://amzn.to/395kdhx

Lien Aliexpress : https://bit.ly/2FPjnLe

Précédent Suivant

Laisser un commentaire

3 commentaires
  • L
    LEDEdit TM

    Pixel LED Effects Download Pack: 7000 Effects for LEDEdit
    https://lededittm.com/pixel-led-effects-download-pack-7000-effects-for-lededit

    Pixel LED Effects Download for LEDEdit, Jinx, NeonPlay, and More
    https://lededittm.com/pixel-led-effects-download-for-lededit-jinx-neonplay

  • T
    Tim Jara

    I have purchased a SK6812 RGBW LED strip, SP108E controller and power supply. I plan to install the LED strip in channels that will go under two “floating shelves”. The shelves are in a corner and shaped like the letter “L” with one side being about 7 feet and then 4 feet. I plan to install a 3 ft channel in the long section and a 2 ft channel in the shorter shelf.
    My question is how to properly connect the wires. Do I have to run the power in series (run one set of wires from the end of the first LED to the start of the second LED) or can I run two sets of wire to power to the ends of each channel? There will be a total of 4 channels (2 for each shelf). I can provide a drawing if it helps to understand what I plan to do.

  • E
    Eugene Horvath

    This is new to me. I want to put these under cabinet. I would like to get the sk6812, 60 leds, cool white, rgbw. No wi fi control. I would like to know what I would need to power and control these. Also how much the cost for everything would be. I live in Michigan. Thank you for any help that you can give me.

Didn't find the product you were looking for?