No Products in the Cart
TV PC Backlight Kit 4K-HDMI Monitor Wifi Alexa Voice Google Assistant Control HDTV Screen LED Lights Ambient Dream Back Lighting
This is a fully automatic system, without any setup. It can accurately read the color of each pixel on the edge of the screen and display it on the light strip to increase levels of immersion by syncing with what is happening on your screen.
Dynamic dream color light strip can displays the side colors of the screen in realtime behind your TV or PC monitor. It could creat dream color light to your TV PC or other monitor HDMI-compatible system.
Control box input power: DC5V.
Driver color sequence: SPI GRB.
Maximum number of LEDs per channel: 150 pixel chips.
Voice control: Built-in microphone.
LED light strip parameters:
Working voltage: DC5V.
LED light strip type: WS2812B IC.
Color range: 16 million colors.
Number of LEDs: 48 leds/m.
Support maximum resolution: 4096x2160 (4K).
Support color depth: 10/12/16Bit.
Protocol version: 1.4b.
Support frame rate:
4096x2160 YCbCr420 encoding@60Hz.
1, The installation and setup takes only about 8-10 minutes and requires no expertise or a soldering iron, because everything is already wired and provided with plugs.
2, Of course, you should make sure that the TV back is about 5-15cm from the wall, because the wall serves as a reflector and therefore the wall should be white.
1, This system does NOT support the internal TV tuner and internal smart apps, also it dose NOT support HDR.
2, This kit is designed for anyone who uses their TV with an external HDMI-compatible source. such as a SAT / cable receiver, TV Box, Xbox, playstation 4/5 and ect.
3, if your TV with several HDMI-compatible devices, the HDMI-compatible cable must be reconnected by hand.
Q1: How to bend the LED strip at the corner ?
Please bend the LED strip carefully.
Q2: Why does the picture and the light position not match?
1, please check whether the LED strip is installed strictly in accordance with Method A or Method B.
2, please check whether the indicator lights of method A and method B correspond to the installation method.
3, please check whether the extra LED strip at the tail has been cut.
4, please check whether the LED strip is correctly inserted into the corresponding interface.
Q3: Why can't the TV display the picture after connecting to the LED controller box?
1, please check whether the HDMI-compatible input and output cables are correctly connected.
2, please check if the HDMI-compatible signal source (such as TV boxs) is normal.
Please Note: if you pay for the order before August 3rd, you will receive the TV backlighting kits controlled by the IRON BOX. If your order is after August 3, then you will receive a TV backlighting kits controlled by the WIFI APP ( As described in the product details page now ).