Shipping Policy
Notice: Customers should take care of the clearance and customs duties.

Please Note:
If your country's domain name does not end in .COM or .UK. This controller can NOT work with your Alexa. then maybe you could buy other Tuya wifi controller as its replacement, thank you.

Features:
The controller is adopted by the most advanced PWM control technology, and has memory function ( The light status will keep same as the status before you tum off the light ). Wireless and 4G controlled by "Tuya Smart" APP.

Parameters:
Product Model: WB5
Input Voltage: DC12V~24V (5.5*2.1mm).
Output: 6A/Channel ( Total Output Max. 15A).
Working Temperature: -20~60°C.
Communication Mode: WiFi-IEEE 802.11b/g/n 2.4GHz Bluetooth mesh.

Please Note:
WB5 is an upgraded version of WL5, LM053 only work with bluetooth.
Please use "Smart Life" APP or "Tuya Smart" APP to control WB5.
Miboxer APP cannot be used to control WB5 and LM053.
If you have purchased WL5 before, you can change the APP to "Smart Life" APP or "Tuya Smart" APP.

SET Button: Long press "SET" 3 seconds, when the purple pilot lamp blinking, the device go into Link/Unlink mode and Smart Link mode.
( Note: Bluetooth control will be available after linking by WiFi APP).
Switching Output Mode: Short press "SET" button to switch the output mode. The Pilot lamp flickering means switching successfully. Different colors flickering correspond to different output mode.

Attention Please:
1. Please check whether the input voltage of the constant voltage power supply is in accordance with the controller, and please check the connection of both the cathode and anode.
2. The working Voltage is DC12~24V, the controller will be broken if the voltage is higher than 24V.
3. Non-professional user cannot dismantle the controller directly, otherwise, it may cause fire and electric shock.
4. The working temperature is-20~60°C. Do not use the device to direct sunlight, moist and other high temperature area.
5. Please do not use controller around the metal area and high magnetic field, otherwise, it will badly affect the control distance.
6. When the device load to 15A, wire diameter must be over 1.5mm2.